Anticorrosive Coatings
Quick Navigation Menu
Inorganic Pigments
⚫️ - Certified use
◎ - Recommended use
| Color | Color Index | Description | Use |
|---|---|---|---|
| YELLOW | ANTICOR | HABICOR SR-ATD B25 | ⚫️ |
| YELLOW | ANTICOR | HABICOR SR-ATD SS500 | ⚫️ |
| YELLOW | PY 36 | AMARILLO DE ZINC AZ-16 B25 | ⚫️ |
| YELLOW | PY 36:1 | CROMATO BASICO DE ZINC CBZ-18 B10 | ⚫️ |
| ORANGE | PO 21 | NARANJA CROMO NC-22 | ⚫️ |
| WHITE | ANTICOR | HABICOR ZP 3850 B25 | ⚫️ |
| WHITE | ANTICOR | HABICOR ZP 3860 B25 | ⚫️ |
| - | ANTICOR | HABICOR SI B25 | ⚫️ |
| - | ANTICOR | HABICOR CS B25 | ⚫️ |
| - | ANTICOR | HABICOR ZS B25 | ⚫️ |
| - | ANTICOR | HABICOR ZA B25 | ⚫️ |
| - | ANTICOR | HABICOR ZN B25 | ⚫️ |
| - | ANTICOR | HABICOR ZO B25 | ⚫️ |
| - | ANTICOR | HABICOR AZ B25 | ⚫️ |
| - | ANTICOR | HABICOR SP B25 | ⚫️ |
| - | ANTICOR | HABICOR CP 4295 B25 | ⚫️ |
| - | ANTICOR | HABICOR ZM B25 | ⚫️ |
| - | ANTICOR | HABICOR ZTC B25 | ⚫️ |
| - | ANTICOR | HABICOR ZPC B25 | ⚫️ |
| - | ANTICOR | HABICOR BA-AT B25 | ⚫️ |
| - | ANTICOR | HABICOR FRI-1000 T200 | ⚫️ |
| - | ANTICOR | HABICOR FRI-1000 CT1000 | ⚫️ |
| - | ANTICOR | HABICOR FRI-1000 C25 | ⚫️ |
| - | ANTICOR | HABICOR FRI-1001 T200 | ⚫️ |
| - | ANTICOR | HABICOR FRI-1001 CT1000 | ⚫️ |
| - | ANTICOR | HABICOR FRI-1001 C25 | ⚫️ |
| - | ANTICOR | HABICOR PASTE 21 C25 | ⚫️ |
| - | ANTICOR | HABICOR PASTE 21 T300 | ⚫️ |
| - | ANTICOR | HABICOR PASTE 14 C25 | ⚫️ |
| - | ANTICOR | HABICOR PASTE 14 T300 | ⚫️ |
Water-Based Resins
| Product | Technology | Description | Viscosity | pH | % Solids |
|---|---|---|---|---|---|
| W-2018 | Acrylics | Semi-hard film emulsion, suitable for special coatings. | 7,000 - 10,000 | 8.0 - 9.0 | 49.0 - 51.0 |
| W-489 | Styrene Acrylic Copolymer | Rigid transparent film emulsion, specific for manufacturing direct-to-metal paint. | maximum - 450 | 3.0 - 4.0 | 50.0 - 52.0 |
| W-6114 | Styrene Acrylic Copolymer | Rigid film emulsion, specific for the manufacture of anticorrosive primer. | maximum - 400 | 3.0 - 4.0 | 50.0 - 52.0 |
| W-595 | Styrene Acrylic Copolymer | Hard film emulsion, free of plasticizers, suitable for paints in general. | 3,000 - 6,000 | 8.5 - 9.5 | 49.0 - 51.0 |
Solvent-Based Resins
| Product | Type | Applications | %NV | Cutting Solvent | Viscosity (25 C) | Acid Number | Color Gardner | Oil Type | OH Value (Solid Base) |
|---|---|---|---|---|---|---|---|---|---|
| BECKOSOL 12-021 | Short Chain Alkyd | Industrial enamels and lacquers for wood, high durability and low color. | 60 | Toluene | X-Z | 12 Max | 3 Max | Coconut | 158 |
| BECKOSOL® 11-2550-W | Medium Chain Alkyd | Paints, industrial primaries. | 50 | Naphtha Gas | Z6-Z7 | 5-10 | 7 Max | Linseed | - |
| BECKOSOL® 10-060-20 | Long Chain Alkyd | Excellent durability, hard dry, high gloss, air dry architectural enamels, marine roof enamels, household enamels. | 70 | Naphtha Gas | Z4-Z5 | 8 Max | 8 Max | Soy | - |
| BECKOSOL® 10-060-30 | Long Chain Alkyd | Moderately fast air drying architectural and industrial enamels. High gloss and viscosity, good brushability and excellent durability. | 70 | Naphtha Gas | Z6+1-Z7 | 8 Max | 8 max | Soy | - |
| BECKOSOL® 11-1060-W | Long Chain Alkyd | Decorative and primary air-drying enamels, excellent shine and retention. | 60 | Naphtha Gas | X-Y | 5-10 | 6 Max | Linseed | - |
| BECKOSOL® 12-105-50 | Cut Chain Alkyd | Industrial air-drying enamels, Low-bake enamels for industrial equipment, metal cabinets and tools. Lacquer modifier, Excellent compatibility with ureas and melamine. | 50 | Xylene | Z1-Z3 | 10 Max | 3 Max | Soy | 4.6 |
| BECKOSOL® 12-105-60 | Cut Chain Alkyd | High viscosity fast air drying industrial enamels. Low-bake enamels for industrial equipment and tools. 2K systems for wood. Good compatibility with colored rubber. | 60 | Xylene | ~Z6-Z7 | 10 Max | 3 Max | Soy | 4.6 |
| BECKOSOL® 12-107-60 | Cut Chain Alkyd | Automotive paint enamels, fast drying, corrosion resistant industrial primers, exterior and interior finishes, fast curing with amino resins, low-bake enamels. | 60 | Xylene | Z7-Z8 | 8-13 | 4 Max | Soy | 3.56 |
| BECKOSOL® 12-901-01 | Cut Chain Alkyd | Two-component polyurethane lacquers and primers for wood, good resistance to yellowing, compatible with acrylic resins, resistance to cold-check. | 60 | Xylene | Z2-Z3 | 5-10 | 3 Max | Soy | 2.97 |
| BECKOSOL® 12-907 | Cut Chain Alkyd | Designed to react with isocyanates. Finishes and backgrounds for wood. Good toughness, excellent gloss, fast drying. Good resistance to yellowing and cold check. | 60 | Xylene | 5500-10000 cps | 5-10 | 3 Max | Soy | 2.98 |
| BECKOSOL® 13-4355-X | Cut Chain Alkyd | Quick drying enamels for metals, automotive refinish, and industrial finishes. | 55 | Xylene | Z1-Z3 | 20 Max | 4 Max | Soy | 3.26 |
| AMBERLAC ® 1074 | Copolymers/Vinyl Toluene | It is a copolymer of vinyl toluene which cures by oxidation at room temperature in the presence of metallic driers. Fast drying, excellent spray stability, excellent propellant compatibility, fast sanding, high gloss. They are applied in quick-drying enamels, spray paints, metal primers, hammered finishes, traffic paint, sealants, and varnishes. | Vinyl Toluene | 59-61 | VM&P NAPHTHA | Y-Z1 | 7 Max | Linseed | - |
| AROLON® 847-W-42 | Emulsion | High chemical resistance coatings for metal and concrete, good development of hardness in low thickness. | 42 | - | 500 Max | - | - | 7.5-8.5 |
Cellulose Rheological Modifiers
| Product | Description | Chemical Base | Viscosity (2% sol. T = 25°C ) | Appearance | Humidity | pH |
|---|---|---|---|---|---|---|
| HEADCEL HE30000 SE | For high shear, better splash resistance, better sag resistance, longer open time. | HEC | 22,000-38,000 Pa.s | White or yellowish powder | <5% | 5 - 8 |
| HEADCEL HE60000 SE | For high shear, better splash resistance, better sag resistance, longer open time. | HEC | 48,000-72,000 Pa.s | White or yellowish powder | <5% | 5 - 8 |
| HEADCEL HE100000 SE | Higher thickening, better performance cost, better water resistance, higher viscosity when diluting with water. | HEC | 80,000-120,000 Pa.s | White or yellowish powder | <5% | 7 - 8 |
Synthetic Rheological Modifiers
| Product | Description | Chemical Base | pH | % Solids |
|---|---|---|---|---|
| AGOCEL PU 227 | Associative polyurethane thickener with good thickening power. | HEUR | 6 - 8 | 17 |
| AGOCEL PU 237 | Associative polyurethane thickener with good thickening power. | HEUR | 5.5 - 6.5 | 17 |
| AGOCEL PU 240 | Associative polyurethane thickener with good thickening power. | HEUR | 5.5 - 6.5 | - |
| AGOCEL X | Associative acrylic thickener for water-based. | HASE | 3 - 4 | 30 |
| WP-383 | Associative acrylic thickener with high flowability. | HASE | 2 - 3.5 | 29.5 - 30.5 |
Guar Rheological Modifiers
| Product | Description | Chemical Base | Viscosity C = 2% T = 20°C ; 20 rpm | Low Shear | High Shear | Water Retention | Synthetic Resins | Silicates | Dosage [%] |
|---|---|---|---|---|---|---|---|---|---|
| AGOCEL I 5 D | High performance in high cut applications. Prevents paint splatter during application. | HPG | Low | + | ++ | ++ | ✓ | - | 0.4 - 1.2 |
| AGOCEL I 115 D | Round product for architectural paints with good water retention. | HPG | Medium | ++ | + | ++ | ✓ | - | 0.3 - 1.0 |
| AGOCEL I 30 D | Profitable behavior and pseudoplastic behavior. | HPG | High | ++ | + | ++ | ✓ | - | 0.15 - 0.8 |
| AGOCEL I 50 D | Recommended for plasters with excellent water retention. | Modified HPG | High | ++ | + | +++ | ✓ | - | 0.15 - 0.7 |
| AGOCEL I 155 D | Very efficient in the low shear stress range. Positive influence on anti-sedimentation behavior. | Modified HPG | High | +++ | + | ++ | ✓ | - | 0.15 - 0.6 |
Xanthan Rheological Modifiers
| Product | Description | Chemical Base | Viscosity C = 2% T = 20°C ; 20 rpm | Low Chear | High Shear | Water Retention | Synthetic Resins | Silicates | Dosage [%] |
|---|---|---|---|---|---|---|---|---|---|
| AGOCEL V 500 D | Very efficient in the low shear stress range. Positive influence on anti-sedimentation behavior. | Xanthan | High | +++ | + | - | ✓ | - | 0.01 - 0.5 |
| AGOCEL V 600 | Good anti-sedimentation behavior in silicate systems. | Xanthan | High | +++ | + | - | ✓ | ✓ | 0.01 - 0.5 |
| AGOCEL X 1000 | Strong thickening effect. | Acrylate | Medium | ++ | ++ | - | ✓ | ✓ | 0.1 - 2.0 |
Clay Rheological Modifiers
| Product | Characteristics | Chemical Base | Mineral | Water Base | Solvent Base |
|---|---|---|---|---|---|
| PANGEL S9 | It is a highly effective additive made up of high purity sepiolite that confers optimal rheology and absence of segregation to the systems in which it is incorporated, improving its stability and application properties. | Hydrated Magnesium Silicate | Sepiolite | ✓ | - |
| PANGEL B10 | Powder additive with high thickening and anti-settling capacity for medium-low polarity systems, especially recommended for systems based on white spirit-type solvents. | Hydrated Magnesium Silicate | Sepiolite | - | ✓ |
| PANGEL B20 | High-thickening and anti-settling powder additive for medium-low to medium polarity systems, especially recommended for aromatic and unsaturated polyester solvents. | Hydrated Magnesium Silicate | Sepiolite | - | ✓ |
Defoamers
| Products | Characteristics | Chemical Base | Active Content [%] | Grinding | Finished | Degree of Incompatibility | Dosage [%] | Water Base | Solvent Base |
|---|---|---|---|---|---|---|---|---|---|
| HANSA ADD 5085 | Very compatible defoamer that is mainly used in the let-down phase. | Organomodified polysiloxane | 100 | - | ✓ | + | 0.2 - 0.5 | ✓ | ✓ |
| HANSA ADD 5020 | Universal defoamer that can be applied both in the crushing and in the lowering phase. | Organomodified polysiloxane | 100 | ✓ | ✓ | ++ | 0.2 - 0.5 | ✓ | ✓ |
| HANSA ADD 5744 | Effective antifoam emulsion containing hydrophobic silica for the grinding stage with good compatibility. | Emulsion based on organomodified polysiloxanes | 20 | ✓ | - | +++ | 0.2 - 1.0 | ✓ | ✓ |
| HANSA ADD 5425 | Universal antifoam compound with high compatibility in various applications, primer applied in the grinding stage. | Compound of organomodified polysiloxanes and polyglycol | 100 | ✓ | - | ++ | 0.2 - 0.5 | ✓ | ✓ |
Humectants
| Product | Description | Chemical Base | Over Application | Leveling | Dosage [%] | Water Base | Solvent Base |
|---|---|---|---|---|---|---|---|
| HANSA ADD 150 | Excellent substrate wetting and anti-crater effect. Highly efficient in automotive coatings. | Organomodified trisiloxane | +++ | + | 0.1 - 0.3 | ✓ | ✓ |
| HANSA ADD 1060 | Universal wetting agent for wood and furniture coverings. Excellent wetting porocy. Suitable for UV curing systems. | Organomodified trisiloxane | +++ | + | 0.1 - 0.3 | ✓ | ✓ |
| HANSA ADD 1305 | Good wetting and leveling properties over a wide pH range. | Organomodified polysiloxane | ++ | +++ | 0.1 - 1.0 | ✓ | ✓ |
| HANSA ADD 1364 | Excellent anti-crater effect. High compatibility and simple incorporation with low foaming tendency for water systems, eg. Wood cladding. | Compound of organomodified polysiloxane and glycol ether | +++ | +++ | 0.1 - 1.0 | ✓ | ✓ |
| VARISURF SP 5150 | Substrate wetting agent with a very low foaming tendency and alkaline stability. | Phosphoric acid ester | +++ | - | 0.5 - 3.0 | ✓ | ✓ |
Leveling Agents
| Products | Characteristics | Chemical Base | Glide | Cleaning | Over Application | Reactivity with OH- Groups | Dosage [%] | Water Base | Solvent Base |
|---|---|---|---|---|---|---|---|---|---|
| HANSA ADD 1010 | High compatibility. Perfect for clear coatings. Suitable for UV systems. | Organomodified Polysiloxane | ++ | - | + | + | 0.1 - 1.0 | ✓ | ✓ |
| HANSA ADD 1325 | High slip leveling additive. | Organomodified Polysiloxane | +++ | + | - | - | 0.1 - 1.0 | ✓ | ✓ |
| HANSA ADD LSN | Leveling, good glide and moderate overcapacity. | Organomodified Polysiloxane | +++ | - | + | + | 0.1 - 1.0 | ✓ | ✓ |
| HANSA ADD 4035 | Surface additive with good leveling and high slip. Suitable for UV systems. | Organomodified Polysiloxane | ++ | ++ | - | ++ | 0.2 - 1.0 | ✓ | ✓ |
| HANSA ADD 4090 | Leveling additive with easy to clean effect in 2-K-PU systems. | Organomodified Polysiloxane | +++ | +++ | - | ++ | 0.1 - 1.0 | ✓ | ✓ |
Dispersants
| Product | Characteristics | Chemical Base | pH | Appearance | Viscosity (Brookfield RV, spindle: 1, 20 rpm) | % Solids | Water Base | Solvent Based |
|---|---|---|---|---|---|---|---|---|
| AGOCHEM D 1036A | It is compatible with a wide range of pigments, extenders and polymers. It is effective over a wide pH range and is heat stable. | Ammonium Polyacrylate | 5.7 – 7.3 | Liq. Yellowish | < 500 mPas | 36 | ✓ | ✓ |
| VARISURF D 1044 | It is used to improve dispersion stability and at the same time to achieve very good film properties. | Sodium polyacrylate | 6.0 – 8.0 | Liq. Dark Yellowish | 500 – 1,100 mPas | 44 | ✓ | ✓ |
| VARISURF D 5450 | It is a dispersant additive to improve the distribution of pigments, resulting in a homogeneous and finely distributed dispersion. | Sodium polyacrylate | 9.9 – 10.9 | Liq. Clear or slightly Yellowish | 50 – 200 mPas | 25 | ✓ | ✓ |
| VARISURF D 5500 | It is a dispersant to improve pigment distribution. | Sodium polyacrylate | 8.0–9.0 | Liq. slightly yellowish | 300 - 700 mPa.s | 45 | ✓ | ✓ |
| VARISURF D 5550 | It is a powder dispersant additive to improve pigment distribution in pasty systems. It is also excellent for use in dry plaster, lime or cement based mortar mixes. | Phosphate Combination | 8.0 – 9.0 (1 % at 20 °C) | White powder | - | 100 | ✓ | ✓ |
| Product | Characteristics | Specific Gravity | Appearance | Active Content | Color | Solvent Base |
|---|---|---|---|---|---|---|
| SUSPRADIS MS-6023 | Effective on various types of organic and inorganic pigments. Recommended for use in a wide range of high performance solvent based coatings. | 0.90 – 0.94 | Clear to slightly hazy liquid. | 49 -51 % | Max 12 gardner | ✓ |
Carbonates
| Product | Ret. 325 mesh | Apparent Density (kg/L) |
|---|---|---|
| MICROCARB 325 DA | 1% | 0.8 |
| MICROCARB 5 DA | <1% | - |
| MICROCARB 3 DA | <1% | 0.65 |
| MICROCARB 2 | <1% | 2.74 |
| Micral TIXTENDER | <1% | 0.5 |
Barite
| Product | pH (% Solution) | Density (gr/cc) / Slurry Pigment | Abs. Oil (Gardner Colleman Method) / Experimental Water | Solids | 20 Microns (%) | 10 Micorns (%) | 2 Microns (%) |
|---|---|---|---|---|---|---|---|
| BARITA T | 8.5 / 30% | 3.83 | 9.44 / 13 | 1 | 93 | 93 | 6 |
| BARITA TX | 8.5 / 30% | 3.83 | 12.13 / 17 | 1 | 100 | 100 | 20 |
Mica
| Product | pH (% Solution) | Density (gr/cc) / Slurry Pigment | Abs. Oil (Gardner Colleman Method) / Experimental Water | Solids | 20 Microns (%) | 10 Microns (%) | 2 Microns (%) |
|---|---|---|---|---|---|---|---|
| MICA C10 | 8.5 | 2.79 | 30.34 / 33 | 1 | 93 | 70 | - |
Kaolin
| Product | pH | Density (gr/cc) / Slurry Pigment | Abs. Oil (Gardner Colleman Method) / Experimental Water | Solids | 20 Microns (%) | 10 Microns (%) | 2 Microns (%) |
|---|---|---|---|---|---|---|---|
| SIAMIL KP-FL | 5.3 | 2.45 | 37.76 / 45 | - | 95 | 74 | 46 |
| SIAMIL M1-FL | 5.1 | 2.49 | 28.32 / 37 | - | 93 | 77 | 40 |
| SIAMIL SLURRY PRIME | 8 | 1.69-173 / 2.6 | 33 / 37 | 0.67 | - | - | 90 |
| SIAMIL SLURRY TR | 8 | 1.755-1.765 /2.6 | 30 / 33 | 0.71 | 89 | 80 | 62 |
| SIAMIL KWFL | 7.4-7.6 | 2.6 | 28.32 / 33 | 1 | 85 | 65 | 40 |
| SIAMIL KWFL F | 7.4 | 2.6 | 31.46 / 40 | 1 | 96 | 79 | 40 |
| SIAMIL RL-V | 2.53 | 2.53 | 30.34 / 2 | 1 | 90 | 71 | 51 |
Talc
| Product | pH | Density (gr/cc) / Slurry Pigment | Abs. Oil (Gardner Colleman Method) / Experimental Water | Solids | 20 Microns (%) | 10 Microns (%) | 2 Microns (%) |
|---|---|---|---|---|---|---|---|
| TALCO MN-X | 9.5 | 2.75 | 45 / 52 | 1 | 100 | 93 | 29 |
| TALCO MT X | 9.4 | 2.76 | 46.45 / 50 | 1 | 99 | 90 | 38 |
| TALCO TV X | 8.7 | 2.8 | 30.97 / 45 | 1 | 98 | 88 | 26 |
| TALCO W51 X | 9.5 | 2.74 | 40.9 / 45 | 1 | 98 | 83 | 36 |
Corporate Headquarters
Address: Av. Industrias Pte 1200
Col. Bella Vista
Monterrey, Nuevo León, México, C.P. 64410
Phone: +52 81 8625 5600